Catalogue 2026 · Packaging sourcing, open book+1 (225) 340-2918hello@truepackglobal.com

TPG-TDieline templates / Flat-bottom pouch

Free flat-bottom pouch dieline templates.

A flat-bottom (box-bottom) pouch has side gussets and a rectangular base, so it stands like a small carton. These starter files show the front, back, side gussets and bottom panel, with seals, zipper or pocket-zip, tear notch and a typical coffee-valve mark. Matte, soft-touch and foil are chosen on the quote, not the die.

Quote this flat-bottom pouch →SVG + PDF · no email needed · confirm final specs with us before print

Download a size.

Every file: trim (black), 0.125 in / 3 mm bleed (red), safe zone (green), folds (blue). Print or place at 100%.

Flat-bottom pouch dieline, 4 x 6.5 in + 2.5 in side gusset4 x 6.5 in + 2.5 in side gussetPDF ↓SVG ↓
Flat-bottom pouch dieline, 5 x 8 in + 3 in side gusset5 x 8 in + 3 in side gussetPDF ↓SVG ↓
Flat-bottom pouch dieline, 6 x 9.5 in + 3.5 in side gusset6 x 9.5 in + 3.5 in side gussetPDF ↓SVG ↓
Flat-bottom pouch dieline, 7 x 11 in + 4 in side gusset7 x 11 in + 4 in side gussetPDF ↓SVG ↓
Flat-bottom pouch dieline, 8 x 11.5 in + 4.5 in side gusset8 x 11.5 in + 4.5 in side gussetPDF ↓SVG ↓
Flat-bottom pouch dieline, 9 x 13 in + 5 in side gusset9 x 13 in + 5 in side gussetPDF ↓SVG ↓
Flat-bottom pouch dieline, 10 x 14.5 in + 5.5 in side gusset10 x 14.5 in + 5.5 in side gussetPDF ↓SVG ↓

Starter template, not a production die. Sizes and offsets follow general print standards. Material and machine change the exact die, so confirm final specs with us (hello@truepackglobal.com) before you send files to print.

What to watch on a flat-bottom pouch.

  • 01Side and top heat seals are usually 3/8 in (9.5 mm). The vertical edges of each side gusset are sealed to the front and back (quad seals); keep text and logos off them.
  • 02The bottom panel is the standing footprint: width by gusset depth. Corner folds, often called K-seals, box the base so the pouch stands square.
  • 03A full-width zipper sits near the top on the front and back; a pocket zipper sits on the front face only. Positions vary by machine; ours are typical and we confirm them on your quote.
  • 04A one-way degassing valve, used on coffee bags, is marked in a typical position on the front. Foil, matte and soft-touch films are a material choice, not a change to this die.
  • 05Bleed 0.125 in (3 mm) past trim on every edge that has colour; safe zone 0.5 in inside trim.

Check your size.

Enter a size to get bleed, safe-zone and minimum-text guidance. This runs in your browser; nothing is sent.

General print guidance, not a production spec. Factories differ: confirm final specs with us before print.

Questions.

01Are these flat-bottom pouch dielines free?

Yes. Download the SVG or PDF directly; there is no email gate or sign-up.

02What bleed and safe zone do the templates use?

Bleed is 0.125 in (3 mm) past trim on every edge. The safe zone is 0.5 in inside trim, which also keeps text off the 3/8 in heat seals.

03Can I send these straight to print?

No. They are starter templates that follow general print standards. Material and machine change the exact die, so confirm final specs with TruePack Global before print.

04How do I get a flat-bottom pouch quoted?

Use the quote form on this page or at truepackglobal.com/quote. We quote it free and show the factory price and our margin as separate numbers.

05What is a flat-bottom or box-bottom pouch?

It is a flexible pouch with side gussets and a rectangular base, sometimes called a box pouch. It stands like a small carton, with printable front, back, side and bottom panels.

06How is a flat-bottom pouch different from a stand-up pouch?

A stand-up pouch has a bottom gusset that folds in half under the bag. A flat-bottom pouch has side gussets and a boxed bottom, so it stands squarer and gives you printable side and bottom panels. We have starter dielines for both.

07Do these templates include a zipper or a coffee valve?

Yes. Each file marks a typical full-width zipper, a front-only pocket zipper, tear notches, and a typical one-way valve position on the front. Exact placement depends on the machine, so confirm final specs with us before print.

08Can I specify matte, soft-touch or foil on the same dieline?

Yes. Those are film and finish choices, not a change to the die. Tell us the finish you want on the quote; we confirm structure and print with the factory.

Get this flat-bottom pouch quoted free, factory price and our margin shown separately.

Get a free quote →