TPG-TDieline templates / Jar label
Free jar label dieline templates.
Wrap-around label length is the jar circumference (π x diameter) minus a small gap so the ends do not overlap. Measure the straight wall of your jar, not the shoulder.
Download a size.
Every file: trim (black), 0.125 in / 3 mm bleed (red), safe zone (green), folds (blue). Print or place at 100%.
6.03 x 1.5 in (for 2 in Ø jar)
7.6 x 2 in (for 2.5 in Ø jar)
8.39 x 2.25 in (for 2.75 in Ø jar)
9.17 x 2.5 in (for 3 in Ø jar)
10.75 x 3 in (for 3.5 in Ø jar)
12.32 x 3.5 in (for 4 in Ø jar)Starter template, not a production die. Sizes and offsets follow general print standards. Material and machine change the exact die, so confirm final specs with us (hello@truepackglobal.com) before you send files to print.
What to watch on a jar label.
- 01Measure the label panel height between the shoulder and the base curve, then subtract about 1/16 in each side.
- 02A 1/4 in gap between the label ends keeps them from lifting. Ask if you want an overlap instead.
- 03Keep the barcode on a flat part of the wrap, rotated so the bars run vertically on small jars.
- 04Bleed 0.125 in (3 mm) past trim on every edge that has colour; safe zone 0.125 in inside trim.
Check your size.
Enter a size to get bleed, safe-zone and minimum-text guidance. This runs in your browser; nothing is sent.
General print guidance, not a production spec. Factories differ: confirm final specs with us before print.
Questions.
01Are these jar label dielines free?
Yes. Download the SVG or PDF directly; there is no email gate or sign-up.
02What bleed and safe zone do the templates use?
Bleed is 0.125 in (3 mm) past trim on every edge. The safe zone is 0.125 in inside trim.
03Can I send these straight to print?
No. They are starter templates that follow general print standards. Material and machine change the exact die, so confirm final specs with TruePack Global before print.
04How do I get a jar label quoted?
Use the quote form on this page or at truepackglobal.com/quote. We quote it free and show the factory price and our margin as separate numbers.