TPG-TDieline templates / Stand-up pouch
Free stand-up pouch dieline templates.
Front and back panels with the bottom gusset fold, 3/8 in side and top seals, zipper line and tear notch marked. Artwork in the bottom half of the gusset sits under the pouch when it stands.
Download a size.
Every file: trim (black), 0.125 in / 3 mm bleed (red), safe zone (green), folds (blue). Print or place at 100%.
3.5 x 5.5 in + 2 in gusset
4 x 6 in + 2.5 in gusset
5 x 8 in + 3 in gusset
6 x 9 in + 3.5 in gusset
7 x 11.5 in + 4 in gusset
8 x 12 in + 4.5 in gussetStarter template, not a production die. Sizes and offsets follow general print standards. Material and machine change the exact die, so confirm final specs with us (hello@truepackglobal.com) before you send files to print.
What to watch on a stand-up pouch.
- 01Side and top heat seals are usually 3/8 in (9.5 mm); keep text and logos off them.
- 02The bottom gusset folds at half its depth. Art below the fold is on the base of the pouch.
- 03Zipper and tear notch positions vary by machine. Ours are typical; we confirm them on your quote.
- 04Bleed 0.125 in (3 mm) past trim on every edge that has colour; safe zone 0.5 in inside trim.
Check your size.
Enter a size to get bleed, safe-zone and minimum-text guidance. This runs in your browser; nothing is sent.
General print guidance, not a production spec. Factories differ: confirm final specs with us before print.
Questions.
01Are these stand-up pouch dielines free?
Yes. Download the SVG or PDF directly; there is no email gate or sign-up.
02What bleed and safe zone do the templates use?
Bleed is 0.125 in (3 mm) past trim on every edge. The safe zone is 0.5 in inside trim, which also keeps text off the 3/8 in heat seals.
03Can I send these straight to print?
No. They are starter templates that follow general print standards. Material and machine change the exact die, so confirm final specs with TruePack Global before print.
04How do I get a stand-up pouch quoted?
Use the quote form on this page or at truepackglobal.com/quote. We quote it free and show the factory price and our margin as separate numbers.