TPG-TDieline templates / Sticker
Free sticker dieline templates.
Die-cut sticker and seal labels. Rounded corners (0.125 in) peel and wear better than square ones.
Download a size.
Every file: trim (black), 0.125 in / 3 mm bleed (red), safe zone (green), folds (blue). Print or place at 100%.
1.5 in circle
2 in circle
3 in circle
4 in circle
2 x 2 in square, 0.125 in corners
3 x 3 in square, 0.125 in corners
2 x 3.5 in rectangle, 0.125 in corners
4 x 2 in rectangle, 0.125 in cornersStarter template, not a production die. Sizes and offsets follow general print standards. Material and machine change the exact die, so confirm final specs with us (hello@truepackglobal.com) before you send files to print.
What to watch on a sticker.
- 01Kiss-cut and die-cut tolerance is often about 1/32 in, which is why the safe zone matters.
- 02Thin white borders under 1/16 in can look uneven after cutting.
- 03For roll labels, tell us the core size and unwind direction for your applicator.
- 04Bleed 0.125 in (3 mm) past trim on every edge that has colour; safe zone 0.125 in inside trim.
Check your size.
Enter a size to get bleed, safe-zone and minimum-text guidance. This runs in your browser; nothing is sent.
General print guidance, not a production spec. Factories differ: confirm final specs with us before print.
Questions.
01Are these sticker dielines free?
Yes. Download the SVG or PDF directly; there is no email gate or sign-up.
02What bleed and safe zone do the templates use?
Bleed is 0.125 in (3 mm) past trim on every edge. The safe zone is 0.125 in inside trim.
03Can I send these straight to print?
No. They are starter templates that follow general print standards. Material and machine change the exact die, so confirm final specs with TruePack Global before print.
04How do I get a sticker quoted?
Use the quote form on this page or at truepackglobal.com/quote. We quote it free and show the factory price and our margin as separate numbers.