TPG-TDieline templates / Shipping carton
Free shipping carton dieline templates.
Regular slotted carton (RSC), the standard corrugated shipper and master carton, plus divider inserts so each jar gets its own slot. Sizes are inside L x W x D for 2, 3, 6 and 12 jars of 2.5 in or 3 in diameter, packed upright. No dividers, your own jar: inside length = jars across x diameter + 1/4 in.
Download a size.
Every file: trim (black), 0.125 in / 3 mm bleed (red), safe zone (green), folds (blue). Print or place at 100%.
Jar divider sets: one slot per jar.
Cell partitions in 1/8 in (B-flute) board. 2 and 3 packs use 1 x 2 and 1 x 3 pads with end flaps; 6 and 12 packs use 2 x 3 and 3 x 4 interlocking slotted strips. Cells are jar diameter + 1/8 in. Each file shows the strips to cut, how many, and a top view of the assembled set.
Cartons sized for the dividers.
The same RSC die with the inside grown to fit the matching divider set and its board. Pair each carton with the divider set of the same size.
Jar sizes are typical-size examples, not measured on your jar. The 2.5 in and 3 in diameter jars are common sizes, not a specific brand's jar. Measure yours at its widest point with the lid on, and confirm board and final sizes with us before you cut or print.
Starter template, not a production die. Sizes and offsets follow general print standards. Material and machine change the exact die, so confirm final specs with us (hello@truepackglobal.com) before you send files to print.
What to watch on a shipping carton.
- 01Corrugated board adds thickness at every score, so outside dimensions run larger than inside. The factory adjusts the die to your flute (E, B or double wall).
- 02Glass jars usually ship with cell dividers. Dividers add to the inside size, so pair each divider set below with its divider-ready carton, not the no-divider sizes.
- 03Outer flaps are half the carton width so they meet in the middle. The 1.25 in manufacturer's joint is glued or taped and left unprinted.
- 04Bleed 0.125 in (3 mm) past trim on every edge that has colour; safe zone 0.125 in inside trim.
Check your size.
Enter a size to get bleed, safe-zone and minimum-text guidance. This runs in your browser; nothing is sent.
General print guidance, not a production spec. Factories differ: confirm final specs with us before print.
Questions.
01Are these shipping carton dielines free?
Yes. Download the SVG or PDF directly; there is no email gate or sign-up.
02What bleed and safe zone do the templates use?
Bleed is 0.125 in (3 mm) past trim on every edge. The safe zone is 0.125 in inside trim.
03Can I send these straight to print?
No. They are starter templates that follow general print standards. Material and machine change the exact die, so confirm final specs with TruePack Global before print.
04How do I get a shipping carton quoted?
Use the quote form on this page or at truepackglobal.com/quote. We quote it free and show the factory price and our margin as separate numbers.
05Do the jar divider sets fit the no-divider cartons?
No. Each divider wall adds about 1/8 in, so the no-divider cartons are too tight. Use the divider-ready carton with the same size as the divider set.
06What board do the jar dividers assume?
1/8 in B-flute corrugated, a common choice for glass jars. Chipboard or E-flute is thinner, so the strips and the carton come out slightly smaller. We size both to the board you choose.
07How do the jar dividers go together?
For 6 and 12 packs, the long strips slot down over the cross strips to form a grid. For 2 and 3 packs, single pads stand between the jars with their end flaps folded flat against the long sides of the carton.
08Are the jar sizes measured on a real jar?
No. They are typical-size examples, 2.5 in dia. x 3 in tall and 3 in dia. x 4 in tall, not measured on any specific brand's jar. Measure your jar at its widest point, lid on, and confirm sizes with us before you cut or print.