Catalogue 2026 · Packaging sourcing, open book+1 (225) 340-2918hello@truepackglobal.com

TPG-SSolutions / Pet treat & pet food packaging

Pet treat and pet food packaging.

Pet treat and pet food brands need a pack that holds grease and moisture, reseals after opening, carries the required pet-food label, and survives shipping. Common formats are stand-up pouches, mylar bags with a zipper, folding cartons, and jars or tubs. TruePack quotes those formats free from 5,000 units per item, with the factory price and our margin shown separately.

✓ From 5,000 units per item✓ Pouches, mylar, cartons, jars✓ Factory price + margin, shown separately

What to spec.

  • 01Barrier and contact layerMeat-based treats are oily and smelly. A PE or CPP inner layer with a foil or metallised middle layer holds grease and odor better than paper or clear film alone. The contact layer should be a food-contact grade resin.
  • 02ResealA press-to-close zipper and a tear notch are standard on treat and kibble bags that will be opened many times. Ask for a zipper that still seals after repeated use, not only on the first close.
  • 03Size and fillSize the pack to net weight and to how bulky the product is, and leave room for a zipper and for a scoop or humidity pack if you use one. Test-fill with your own product before you print. Typical starting points for treats are about 5 × 8 in for a 4–6 oz training bag, 7 × 10 in for 12–16 oz, and 9 × 13 in for 2 lb or more — starting points only, not a spec.
  • 04Label panelLeave a flat back or side panel large enough for the guaranteed analysis, ingredients, feeding directions and the manufacturer or distributor line at a legible size. A window looks good but lowers the barrier of that panel.
  • 05Case packIf the bag ships in a master carton, include units per case and how the cases palletise. We also quote shipping cartons. A free case pack and pallet calculator will size the carton.
  • 06QuantityWe quote from 5,000 units per item. Tell us units per order, how many orders you expect in a year, and the city the goods should land in.

General guidance from public rules and standards, not legal advice. Regulations change and vary by state; confirm the current text with your regulator before you print. Size examples are typical starting points, not a guarantee they will fit your product.

Get the pack quoted.

Send a spec or a photo of the current bag, carton or jar. We quote the same spec through 17 factories, free, from 5,000 units per item, with the factory price and our margin shown as two separate numbers. Samples are at our cost.

  • 01The packFormat, size, material, zipper or lid, and print or label.
  • 02The fillTreat, kibble, wet food or chew; net weight; any known grease or moisture issues.
  • 03Quantity and ship-toUnits per order, orders per year, and the delivery city.

Stand-up pouches for pet treats, including a free dieline →

Questions.

01What packaging is used for pet treats and pet food?

Dry treats and kibble usually go in a stand-up pouch or a mylar bag with a resealable zipper, sometimes with a hang hole for peg display. Some brands add a folding carton over the bag. Wet food and toppers more often use a jar or tub. The right pack is the one that holds grease and moisture, reseals, and leaves enough panel for the pet-food label.

02What should I include in a packaging spec?

Format and size, the film or board structure you want (or a sample of what you use now), zipper or closure, finish, how the pack is filled, net weight, label or print artwork, units per case and cases per pallet if you have them, quantity per order, orders per year, and the delivery city. A photo of the current pack is enough to start if you do not have a written spec.

03Do pet treat and pet food packs need to be food grade?

Yes. Pet food is food under the Federal Food, Drug, and Cosmetic Act, so the contact layer should meet FDA food-contact rules (21 CFR 174–178). Grease and odor resistance, and a zipper that still works after many openings, are separate from that requirement.

04What has to go on a pet treat or pet food label?

Pet food in the US is regulated by FDA's Center for Veterinary Medicine and by state feed laws, many based on AAFCO model rules. Labels typically need the product name, net quantity, guaranteed analysis, ingredient list, feeding directions, and the manufacturer's or distributor's name and address. Rules differ by state and change, so confirm the current text with your regulator before you print.

05What is the minimum order?

We quote custom printed packaging from 5,000 units per item. The quote and samples are free. When you approve a sample and a price, you see the factory price and our margin as two separate numbers.

06How do I get pet treat or pet food packaging quoted?

Send the spec, or a photo of the current pack, through the form on this page. We quote the same spec through our network of 17 factories, free, with the factory price and our margin shown separately.

Get pet treat or pet food packaging quoted free, from 5,000 units, with the factory price and our margin shown separately.

Get a free quote →