TPG-SSolutions / Child-resistant packaging / Edibles & gummies
Child-resistant mylar bags for edibles & gummies.
Gummies and chocolates need a bag that a child cannot open, that keeps them from sweating or drying out, and that meets your state's label and opacity rules. The bag is usually the cheapest part of that compliance stack to get right early.
What edibles & gummies packaging has to do.
- 01Child resistanceUnder the Poison Prevention Packaging Act (16 CFR 1700), child-resistant packaging is tested with panels of children and adults (16 CFR 1700.20); ASTM D3475 classifies child-resistant package types. Ask for the test report on the exact zipper and film you are buying, not a similar one.
- 02State cannabis rulesMany state cannabis programs require edibles packaging to be child-resistant, opaque or not see-through, resealable for multi-serving products, and free of imagery that appeals to children. Rules differ by state and change, so check your regulator's current text.
- 03Moisture and heatGummies pick up or lose moisture and can stick together in heat. A metallised or foil laminate slows moisture transfer far more than clear film.
- 04Food contactThe inner layer touches food, so it should be a food-contact grade resin compliant with FDA 21 CFR 174–178.
General guidance from public rules and standards, not legal advice. Regulations change and vary by state; confirm the current text with your regulator before you print.
Materials and finishes.
- 01PET / foil / PEHighest barrier and fully opaque; the standard choice when a state requires opacity.
- 02Metallised PET / PELower cost than foil with good barrier; still opaque.
- 03Matte or soft-touch outerCommon finishes for a premium shelf look; spot gloss can highlight the brand mark.
Size guidance.
- 01Single serve (1–5 pieces)About 3.5 × 5 in flat or small stand-up.
- 0210-count gummiesAbout 4 × 6 in stand-up with a 2 in gusset.
- 03Multi-pack / familyAbout 5 × 8 in stand-up; check that the CR zipper spans the full opening.
Typical starting points, not specs. Test-fill with your own product before you print.
Questions.
01Does a child-resistant zipper alone make my bag compliant?
Child resistance is certified for a specific package design, so the zipper, film and seal together are tested. Labeling and opacity rules from your state are separate requirements.
02Can I use a window on an edibles bag?
Some states prohibit packaging that shows the product. Where windows are allowed, they reduce the barrier of the bag. Check your state's rules first.
03Are exit bags required?
Some states accept a non-CR primary package placed in a child-resistant exit bag at the point of sale. Others require the product's own package to be CR. It depends on the state.
04How do I get child-resistant mylar bags for edibles & gummies quoted?
Send your size, material, finish and quantity through the quote form. We quote the same spec through our network of 17 factories, free, and show the factory price and our margin as two separate numbers.